![]() In Options > Devices - Headset and Speakerphone configuration.Uncheck - Enable Zero Touch bandwidth detection.In Options > Application - Zero Touch Configuration.To have the PC ring at an incoming call, check the following : options - devices - Ring device : select the good one (for example "Realtek HD Audio Output") and check "Ring PC speaker as well".If SOP 1 goes down, you will have to switch manually to identity 2, in the Eyebeam settings. Dialplan: #2\a\a.T|.T match=1 prestrip=2.Dialplan: #1\a\a.T|.T match=1 prestrip=2.Authorization user name: resource name (SDX2aaaa).Both of them will use the resource name as Username and Authorization user name. Two identities will have to be created on the Eyebeam phone. In order to work you need to make sure that the extension in the internal directory is set on 2 SOPs, same thing goes for the resource configuration, the resource (SDX2aaaa) should be configured on SOP1 and SOP2. You will need to change at least the following tags for each identity in the settings.cps file.Īctive-Active configuration is supported on the Eyebeam. Registration_time_2: Time before reregister to the second domain.Dialplan_2: Contains the dialplan to apply to the second domain to register to.Domain_2: Contains the second domain to register to.Registration_time_1: Time before reregister to the first domain.Dialplan_1: Contains the dialplan to apply to the first domain to register to.Domain_1 and Domain: Contains the first domain to register to.Name: match the username and the Authorization name.Where is the hostname defined in the resource.ĭialplan_1=#1\a\a.T|.T match=1 prestrip=2 ĭialplan_2=#2\a\a.T|.T match=1 prestrip=2 īelow you will find an explanation of each parameter in the configuration file. You can create your own application that will fetch the settings file from our TFTP server, and reuse the information to generate the Eyebeam configuration.īelow, is an example of an Eyebeam configuration file. It generates a settings file that can be fetched from our TFTP server, that contain information to provision the phone. Now disable all codecs and leave only one codec left :Įscaux does not support auto-provisining of the Eyebeam directly.At the bottom left, click on 'Advanced', followed by 'Audio Codecs'.Rightclick with the mouse over the Eyebeam softphone.This can be accomplished by following these steps: If the Eyebeam softphone is going to be used in a VPN environment, it might be advisable to choose an audio codec which consumes less bandwidth. You should have the following indication: "Ready - Your number is SDX2." ![]() If all went well, you will get the following screen.You will see that the account is visible in the accounts list.Make sure 'Register with domain and receive incoming calls' is selected.Domain: Enter the IP address of the Communicator or Escaux UCS.Authorization User Name, Enter your softphone resource id.User Name, Enter your softphone resource id.This is a sequence of characters like 'SDX2aaaa'. Display Name: Enter your softphone resource id.When first starting Eyebeam, you will be presented with an overview of all accounts.Or you can use the settings file that contains information to auto-provision the Eyebeam. You can either configure it manually like any other software. The Eyebeam softphone can be configured using two mechanisms. Please contact your account manager in order to obtain your license key. If you are installing a professional Eyebeam softphone (instead of the Free X-Lite version), you get a screen which asks you for a License key. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |